V-TAC LED SPOT LIGHT 7W GU10 SMD WARM WHITE 1682

FEATURES 

• Energy consumption – 80% less than standard bulbs
• Extremely long life
• No UV and near-IR radiation
• Instant ON 100 % light, no warm-up time
• Lower thermal output
• Direct replacement for conventional incandescent lamps
• Applications
• Commercial & Residential areas
• Hotels, Bars
• Exhibition Stands
• Chandeliers
• Outdoor applications only in suitable luminaires

SPECIFICATIONS

• Base: GU10
• Real Watts: 7W
• Voltage: 220~240V
• Input Frequency: 50Hz
• Power Factor: >0.5
• Protection Class: IP20
• Body Material: Plastic
• Body color: White
• Dimmable: No
• Life Time: 20000hrs
• Light Color: Warm White 
• Replace: 45 W
• Luminous flux: 500 lm
• Color Rendering Index CRI: >80
• Beam angle: 110 °
• Dimensions:
• Height: 50 mm
• Diameter: 57 mm
• Warranty: 2 YEARS
• Energy class: A+
• Certification: EMC, LVD, ROHS
• Not suitable for use in extreme conditions
• Normal working conditions is -20° +45°
• On/Off cycles: 15000
• Starting Time 100% ON: 0.001 sec (instant on)

HOW TO CHOOSE LED SPOTLIGHT

 • Estimate desired wattage - read the bulb description to choose desired illumination level. But you may also consider the beam angle which determines the illumineted area. The bigger it is - the more area under the spotlight is covered but the luminous flux (the amount of light) is spreaded evenly through so the real brightness will be less. In case the angle is narrow the less powerful spotlight may give you more brightness of the spot but the coverage are will be less.

• Choose between warm and cool light - new LED bulbs are available in 'cool' white light, which is good for task lighting, and 'warm' light commonly used for living areas and houses. Standard halogen and incandescent bulbs mostly have warm white. The common mistake is that the "white" light which is cool white is brighter than "yellow" (which stands for warm). This is not true. If the Lumen is the same - the brightness will be the same. 

• Make sure for the socket base and voltage of your spotlights. Find out if it is GU10 or MR16 (GU 5.3) and if it is 12V or 240V. Check for the specifications to make sure you are buying the correct one. 

ALL NON-DIMMABLE SPOTLIGHTS ARE FOR USE WITH STANDARD ON/OFF SWITCHES ONLY.

Use with any type of dimmer, relay or other control circuit will VOID WARRANTY